Introduction: Water Color Bruise-Movie Effect

Picture of Water Color Bruise-Movie Effect

This instructable will teach you how to make bruises/cuts with water colors.

Step 1: Wet Them Water Colors

Picture of Wet Them Water Colors

I'm using regular kids water colors for this. Start wetting your water colors!




DONT FORGET TO USE WASHABLE ONES OR WEAR AN APRON.

Step 2: Start With a Base Coat

Picture of Start With a Base Coat

I use a purple color for a base color just apply your base color to the area of skin you chose.

Step 3: Layer Layer Layer

Picture of Layer Layer Layer

As layers of colors like red, green, yellow, and maybe a little orange.
And don't forget to rub in each color as you apply. And only add a little at a time In case you screw up.

Step 4: Rub a Dub Dub

Picture of Rub a Dub Dub

You can make some nasty looking bruises and cuts with water colors the key to it is layers and rubbing

Comments

seamster (author)2014-08-15

Nice effect. Very simple too!

About This Instructable

884views

21favorites

License:

Bio: I love to make. Especially when I'm making with my hands and not power tools.
More by jordanguy123:Water Color Bruise-Movie EffectHow To Draw Male Manga/Anime EyesKnex iPod Camera Stablelizer
Add instructable to: