Instructables
Looking for a good waterfight? Water hose too short? Soak those pesky neighbors or water the plants on the far side of the yard with this 3-part water-weenie!
 
Remove these adsRemove these ads by Signing Up

Step 1: Parts & Tools

1 bicycle innertube (preferably used), 1 hose clamp (sized for water hose), 1 female-male hose connector with flow toggle switch (2.50 @ homedepot).

knife & screw driver.

Step 5: Free the Weenie

Turn off hose. close flow from hose to weenie. unscrew hose from weenie. (unscrewing the hose can be a little wet. if you close the flow to the weenie before turning off the hose it will be wetter)

Now, The flow switch on the weenie is the trigger for shooting water out.
DavidKaine3 years ago
> Cut the innertube so that there are two open sides.

i'd like to see someone cut an innertube so that there is one open side, ha! :D
I used to make these with my friends some 20 years ago to pass the hot summers in SoCal. Our version used surgical tubing that we got from a scuba shop and a pen cap. Simply knot the tube on one end and stick the pen cap into the other. We'd usually wrap some rubber bands tightly around it to keep it in place. To fill 'em up we'd stick the pen cap into a water fountain and turn on the water. Then just keep your thumb over the end and let go to soak somebody.
That is EXACTLY how you make them. Or was that just a southern cal thing! I want to make these for my kids. Water fountain...exactly.
This is exactly how we used to do them. My parents wouldn't let us have "guns" back in the day, so we improvised: my mom worked at the hospital so surgical hose was an easy find. My dad owned an advertising business, so those click-pens were plentiful. Combine for fun.
my uncle made something like this i should post an instrucable on it. I will when i get the time. whenever that will be.
looks cool, like the stance, ready for action with the salami, nice.
you have a thing for used innertubes, don't you?
...NICE!!
Karim8 years ago
I should try this sometime next summer
WolvesOfWar8 years ago
lol, nice one
pbwingman118 years ago
Ahhh, what will man think of next?
exe8 years ago
I used to make the surgical tubing water weenies too! We would fill them by simply sticking the pen tip into one of those hose nozzles that were tapered with a small hole (for a thin, forceful stream). One hot summer day while filling mine, the tubing burst in my face and I caught a piece of rubber in the eye. No major damage, but scary. I wasn't allowed to get another one. Just be careful!
howtern (author)  exe8 years ago
We found that bicycle tubing explodes much less violently than surgical tubing. When building your own, consider (safely) filling a few innertubes to failure to get a sense of when and how they break.
I never had any tubing explode on me in the summers that I did this and neither did any of my friends. Still, good point and just wear some goggles while filling them up.
Sweet shirt, hopefully mine will come sometime. :)
trebuchet038 years ago
Looks like a lot of fun, and very easy to make... I'll have to try this -- perhaps fit a nozzle on the other end for even further distance and longer shoot times :D
Haha funny you mention that. The originall design had an open streamer nozzle attached to the other end. Although it may seem like it, it didn't shoot as far, maybe 5 or 6 feet. We had a pretty small stream too. It lasted for a good 4 or 5 minutes, though. So it is really just a trade off. The version posted here is cheaper, too, as you only have to buy one part. Glad to see you like it.