Print PDF
Favorite
Email
Step 5Happy Feet
Next you'll want to put together the feet for this device. Ideally you'll make this into a tripod. You probably could make a set of four feet for it, but that might make the device more cumbersome.
What I did was to take apart two wire hangers and bend them into the shape I needed. Fortunately they already come premade in a fashion close to what I desired. I've lined up the pieces I took from the first hanger next to the second hanger so you can see where I got everything from. The feet are about four inches high.
Make three feet and use a leftover piece of the first hanger to use for the wiggler. You'll attach that last piece to the motor later.
What I did was to take apart two wire hangers and bend them into the shape I needed. Fortunately they already come premade in a fashion close to what I desired. I've lined up the pieces I took from the first hanger next to the second hanger so you can see where I got everything from. The feet are about four inches high.
Make three feet and use a leftover piece of the first hanger to use for the wiggler. You'll attach that last piece to the motor later.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
