This water rocket contains of three boster to get it very very high. Hopefully.
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of materials
For this rocket you need:

3-small water bottles
some straws
tape or glue
wire (I used paperclips if u use paperclips u need about 6 medium ones)
1-completed water rocket


Step 2: Paperclips

Picture of Paperclips
Bend the paperclips into a u shape,

l l
l l
l l

They should look like my picture above.
Make them 1 inch tall and 1/4 inch wide.
Also u need 6.

Step 3: Straws

Picture of Straws
Cut the straw into 1inch tall peices.

You will need 6 of these.


Step 4: Placement on water rocket

Picture of Placement on water rocket
Atach the straws to the sides of the bottle.

Step 5: Placement on bosters

Picture of Placement on bosters
Attach the paperclips in the u shape onto the bottles like in the pictures.
Two paperclips per bottle.

Step 6: Your Done!

To attach the bosters to your rocket.
 Do paperclips and straws really hold up to the immense pressure, and also what is the nozzle that is on the middle bottle cause I can't read the pictures