3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Watercooling a laptop on the cheap

Watercooling a laptop on the cheap
«
  • IMG_8847.JPG
  • IMG_8845.JPG
How to watercool a laptop...or pretty much anything
 
Remove these adsRemove these ads by Signing Up
 

Step 1Step 1: Don't be a moron

Disclaimer: If you break something doing this it is your own damn fault. You REALLY ought to know better than to mix electronics and water. DUH!
For those of you willing to continue despite the risk to life and limb and inevitable financial loss; go to the next step.
« Previous StepDownload PDFView All StepsNext Step »
81 comments
1-40 of 81next »
May 14, 2012. 9:34 PMknexfreak32 says:
While your computer is disassembled you may want to use some thermal grease on older laptops if it is dried up.
May 14, 2012. 7:15 PMknexfreak32 says:
I have a Compaq Presario cm2000 1255 about 14 years old (older than me) it still works like a charm. couldn't pass up a 5$ laptop
Apr 6, 2012. 6:50 PMaxel5890 says:
what is the part number on that radiator you used?
Nov 6, 2011. 1:15 PMzack247 says:
to cool the ram youd probably need to make some waterblocks, but i dont see why it wouldnt be possible.
Mar 22, 2011. 9:10 PMMatrix-technician says:
You could install a low pressure check valve. works like a carburetor neddle.
Mar 22, 2011. 9:05 PMMatrix-technician says:
I would have mounted somthing like this on the bottom of my computer because of it's mass. I used tanntraad's "ible" to make a tiny removable radiator for my comp. My Dell inspiron 1500 has a nasty habit of reaching temperatures capable of burning your lap if you use it for more than 30 mins, but with the new cooling system the fan hardly turns on at all.
Nov 4, 2010. 8:07 AMp0o0p says:
goood work but how to make bump

Jun 10, 2007. 9:13 AMgangster429 says:
Aug 27, 2010. 11:38 AME_MAN says:
Yes. Any radiator would work. I use a 10' coil of copper tubing I got at my local hardware store.
Aug 31, 2009. 1:17 AMcyberkeeper1 says:
or dont connect the two colored wires to each other lol. that causes a big boom. always yellow or red to black
Aug 27, 2010. 11:33 AME_MAN says:
???
Jun 3, 2010. 12:22 PMsqeeek says:
 Just a random idea, would coolant fluid like what I'm always filling my car's radiator with work any better than water? 
Jul 26, 2010. 1:38 PMrock3r4life says:
no, ethylene glycol (normal green car coolant) actually lowers thermal conductivity. its only there to lower freezing point, heighten boiling point, inhibit rust, and lubricate parts like the water pump. your computer isn't subject to as adverse conditions as you car's engine.
Jul 27, 2010. 7:59 AMsqeeek says:
Ah, that makes sense. Thanks.
Jun 3, 2010. 12:15 PMsqeeek says:
 Awesome, I thought those were solid copper. This looks like it's a heck of a lot easier (perhaps more effective, too) than building your own water block, nice job. 
Jun 3, 2010. 12:08 PMsqeeek says:
 Lol actually water's not that conductive unless it's a solvent, i.e. saltwater. Also, any power found in a laptop (with the exception of the inverter for the screen, which can hit as much as 200v) isn't gonna do much harm to yourself, i'd be more worried about the laptop getting zapped than yourself. 

Interesting thing is that when my dad can't figure out how to clear the BIOS of a wireless router that's been partially overwritten or something, he chucks it in a bucket of saltwater for half an hour, then rinses it, then sets it out to dry... Shorts out everything on the board, sometimes has the effect of clearing the BIOS as well. 

Anyway, sweet instructable :D i'm gonna try this with an old Toshiba I've got. It has a desktop processor in it instead of one of the low-heat mobile ones, and always tries to murder itself... 
Mar 3, 2010. 8:02 PMKasm279 says:
What's that HP laptop in the last pic? 
Mar 3, 2010. 8:06 PMKasm279 says:
 err first pic*
Mar 5, 2010. 6:23 AMKasm279 says:
 What model is it specifically?
Feb 28, 2010. 3:02 PMseabee890 says:
Amazing job on the cooling fan, would be steampunk if you could get a bronze or copper radiator and a black light for the fan.  What are you running to generate that much heat ? lol   wscottc60, be careful how much you redneck this type of project, a intube because it has "a threaded bit at one end" may be a cheap way to cause a expensive problem. also if you want to power this with usb, make sure the usb does not cause a draw significant enough to counter the cooling system.   I want to make something lie this for a suitcase nuke style xbox 360 traveling system with tv included. wooo hooo. 
Apr 15, 2008. 3:25 PMDarkeru says:
this is really sweet and I'm working on a related project and wanted to know instead of using water to cool a system, can i use something like alcohol?
Apr 15, 2008. 3:59 PMcafriend says:
Alcohol is a perfect substitute, but in some cases I think it depends on the cooling blocks.
Oct 6, 2008. 8:51 PMdowngrade says:
Distilled water can conduct electricity... deionized water (which is expensive) doesn't conduct electricity
Nov 3, 2009. 2:12 PMtacamaral says:
Actually, it's just the opposite: distilled water contains less impurity, costs more and has lesser conductivity. Deionized water has more "contaminants" (such as organic material), costs less and has higher conductivity.

Distilled water is a great idea, because it will inhibit algae growth, for instance.
Jul 16, 2009. 8:21 AMwscottc60 says:
I was thinking about using an expanding balder for a reservoir capture tank. Something like a piece of innertube, might could even use the valve stem in as much as it is threaded.
Jul 11, 2009. 8:33 AMiProton says:
Oh noes! I spilled the system onto my laptop, fused the motherboard, blacked out the city and gained the ability to see future! LULZ.
Jun 11, 2009. 11:10 AMcameron20020 says:
lol dude you prolly dont even need those fans, with that massive surface area the radiator would have, but awesome job
Jul 22, 2007. 8:57 PMpinstripebob says:
Harbor Freight, a tool company that sells mostly junk, has some tiny water pumps for really cheap. I got one that works pretty well for $3. I guess the only problem there is that it's meant to be plugged in to a household 110V outlet rather than, say, a USB port for power.
May 3, 2009. 11:27 AMDerin says:
You could also use a windshield washer pump.
Jun 3, 2010. 12:13 PMsqeeek says:
www.kidwind.org/xcart/product.php 
Try that one. 

Lol if you get one from Harbor Freight, be sure to buy at least 5, you'll need to keep replacing them. ;)

Bought a Sawz-all from them once... lasted a good 3 minutes. But now I have an awesome 110v speed controlled motor to do something fun with, so no complaints :D
Jul 23, 2007. 8:12 PMpinstripebob says:
If you go to http://www.harborfreight.com/ and search for "mini pump," you'll find a couple that are under $10. The only problem is that they need to be submersed in fluid. You could just stick it in a soda can and seal it with some silicone.
Aug 15, 2007. 2:13 AMJames (pseudo-geek) says:
mods, mods, and more mods. hack it to run off a battery, and hack it to not need to be submersed. this is all about modding.
Mar 27, 2009. 7:56 PMDreamTheEndless says:
submersion keeps the pump cool so that it doesn't overheat.
Apr 14, 2009. 8:22 PMYerboogieman says:
Add some copper tubing on the inside, and make the pumped water go through the copper tubing to cool it and have a pump. =D
Mar 27, 2009. 6:55 PMjunits15 says:
I see that you used two diffrent oumps, where did you get them?
Dec 24, 2008. 10:21 PMfirestorm713 says:
nice instructable. can't wait to try on my laptop...but i should probably wait until i have an alternate computer...I was surprised that you didn't use a blackice radiator or something...though this definitely qualifies as 'on the cheap'! The main question is, how effective is it? you should definitely post the temp. idk what would work with ubuntu tho...
1-40 of 81next »

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
2
Followers
2
Author:jack ruby
I'm Just this guy, you know.