Print PDF
Favorite
Email
Step 2Set Up The Wrap
--- Start by tying the twine and the cord together in a square not.
--- Next, secure the cord to something stable. I used a 5" decking screw in a sawhorse.
--- Use a second screw to create a loop point just before the square knot you just tied.
--- Cut the twine to length. Again, i used about 10ft for this demo, but you can use what you like depending on how large of a bundle you want.
--- Now that you have the setup done, make the first wrap as shown in the picture.
--- Next, secure the cord to something stable. I used a 5" decking screw in a sawhorse.
--- Use a second screw to create a loop point just before the square knot you just tied.
--- Cut the twine to length. Again, i used about 10ft for this demo, but you can use what you like depending on how large of a bundle you want.
--- Now that you have the setup done, make the first wrap as shown in the picture.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
