Print PDF
Favorite
Email
Step 3Wrap
--- Continue to wrap the twine around the cord until you have about a 2" bundle started. Be careful not to wrap this too tight, you only need enough tension to keep the wraps close together.
--- Once you have about 2" wrapped, start overlapping the wraps in the opposite direction. Once you reach the loop point screw, change direction again. Wrap back and forth until you have taken up all of the twine you cut.
--- Once you have about 2" wrapped, start overlapping the wraps in the opposite direction. Once you reach the loop point screw, change direction again. Wrap back and forth until you have taken up all of the twine you cut.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
