Print PDF
Favorite
Email
Step 4Top Support
Now you can start sewing things together, starting with the top support and then the neck strap.
Start by sandwiching the top support over the folded top edge of the tablecloth cutout and pin it down (see the photo). The top support, which the neck strap will eventually be sewn to, should be covering 1-2 inches on either side of the apron. In order to reinforce the plastic tablecloth, you should sew a line through both sides of the top support all the way around a little less than a quarter inch from the edge.
Start by sandwiching the top support over the folded top edge of the tablecloth cutout and pin it down (see the photo). The top support, which the neck strap will eventually be sewn to, should be covering 1-2 inches on either side of the apron. In order to reinforce the plastic tablecloth, you should sew a line through both sides of the top support all the way around a little less than a quarter inch from the edge.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
