Wave Laptop Stand (Making 3D Shapes in Illustrator)

Step 7 Assembly

Assembling the laptop stand was actually a bit painstaking. The problem was that the slots were still too tightly-designed, and the when I had to fit nine at a time for each spine piece, I actually had to use a wood mallet to get everything squeezed together. I took care to support each intersection below with a piece of wood and then hammered everything together, going over each joint to get things flush.

After about 30 minutes, it was done! You can see the completed stand in the pictures below.

Comments

[sherwinsevilla]

wow nice

[-d-a-g-]

 Great Idea...