Print PDF
Favorite
Email
Step 3Start your Glueing
I took the first square and started at the bottom ring, I figured that's what people see when they first see me. So after the Hot Glue gun got nice and hot, I put a large dollop on the hat and positioned the first square. Then I did the second, making sure to stay even as I could, it's kinda like laying down tile on your floor.
When i would get to an edge that the whole square wouldn't fit I placed it where i wanted it to go and used the Sharpie behind the square to mark where to cut. Then I put hot glue, and placed the newly cut square. It keeps the edge looking straight and clean. I kept the same steps for the bill, but i had to make more individual cuts since it curves more.
When i would get to an edge that the whole square wouldn't fit I placed it where i wanted it to go and used the Sharpie behind the square to mark where to cut. Then I put hot glue, and placed the newly cut square. It keeps the edge looking straight and clean. I kept the same steps for the bill, but i had to make more individual cuts since it curves more.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
