Wearable Disco Ball Visor

Step 4 Keep it clean as you go

As you keep Glueing you will get strings or hairs of Glue that Crosses the Mirror Squares. If you Clean them as you go it won't b so bad and look allot cleaner and neater. The cleaner you keep it, in the end the mirror will look better, shinier, and People can't tell what you used to hold the squares in place. When done I put a bead of glue around all the edges. I did this because people kept asking me to see the hat, and i didn't want them to prick there fingers on any edges, Nor did i want to cut myself on my face, just in case.

When done the hat is still flexible and wearable, it's light and you don't notice anything different then a normal visor. But everyone around you will notice, and the brighter the room the more the effect, and since your moving unlike a regular Disco Ball, the lights go everywhere.

Comments

[BIGDaddy504]

The first visor i made i used real glass mirror, problem was the visor got really heavy, and i kept cutting my hands taking it off. People kept trying to touch it and a couple got scratched. I then found flexible Mirror in the automotive section, its used for temporary side mirrors. Its plastic with mirror coating thats flexible i made a 3/4 inch grid i used scissors and cut the squares out. The Second visor i used a Large Paper cutter at my work.

[BlueSuns]

how did you trim the edges of the mirrors?? did you use a dremmel?