My weatherized adapter survived the rainy season and the extremely hot summer as well as several dust and sand storms. I gave it to a friend when I left in November 2007, and I can only assume to it is still there. I made this one specifically to show how I did it.
DISCLAIMER: this instructable requires the use of a knife. Use it safely. I am not responsible if you injure yourself or damage any property while following my instructions. Also, the application is weather resistant, not weather proof. The wireless adapter may still become damaged by the elements. So, please use common sense.
Step 1: Materials and Tools Needed
a wireless network adapter (I used a Linksys Wireless-G)
a USB cable (I would recommend at least 15 feet in length)
a used water bottle
a rool of 100-mile-an-hour tape or duct tape
(optional: paper or white paint and 550 cord)
The only tool need is a sharp knife. (If you have one, a Dremel tool would be useful as well).