Introduction: Web Controlled Socket by Arduino

Picture of Web Controlled Socket by Arduino

I made one Web controlled socket by Taiwan cloned Arduino, which is based by Arduino Pro Mini and ESP8266-1, the official site of this clone is : Webduino = Web x Arduino

We can program it by simple HTML, CSS and JavaScript, it also has online training medias on official site. The result has been tested and posted on YouTube :

Follow the 19 pictures, and you can build one. The program is very easy, just send HIGH/LOW to an Arduino pin by digitalWrite() to on/off a LED.

Step 1:

Picture of

Step 2:

Picture of

Step 3:

Picture of

Step 4:

Picture of

Step 5:

Picture of

Step 6:

Picture of

Step 7:

Picture of

Step 8:

Picture of

By this, the Relay becomes a switch, when we send HIGH to active it, the COM and NO terminals will be connected.

Step 9:

Picture of

Step 10:

Picture of

Get the three pins on relay, and remember the mapping of wires...please!

Step 11:

Picture of

Step 12:

Picture of

Step 13:

Picture of

Step 14:

Picture of

Step 15:

Picture of

Step 16:

Picture of

Seal and fix everything.

Step 17:

Picture of

Step 18:

Picture of works! But, please remember the specifications of components are very important.Especially, safety matter. The controller is Webduino, power it by a smartphone wall charger in orange.

Step 19:

The code is so simple, just like light up a LED :


john.major (author)2016-09-09

Why? I can't think of any safety reasons not to, what am I missing?

R Jordan Kreindler (author)2016-07-11

This is definitely something I can use. Thanks

marcwave (author)2016-01-06

Great project.
What are the grey connectors on step one??? Fuses ?? capacitors??


rsagevik (author)marcwave2016-05-12

Wago connectors

ПетърВ1 (author)2015-12-04

Good project but if you can put in english link. I understand everything but someone not

About This Instructable




More by 建賴:Web controlled socket by ArduinoWiFi based home automation by Intel Edison and Banana Pi M1
Add instructable to: