Print PDF
Favorite
Email
Step 2Tools
tools needed:
soldering device, to mount the ATTINY on the PCB and solder the wires
programmer, (sorry, no other way to program the ATTINY45, this is not an ARDUINO)
(laptop with AVR Studio, AVR Studio is free!)
fine saw, for the PCB and the perspex
knife (for cutting the PCB, the wires)
tweezers(for positioning the ATTINY45 )
fine rasp (for the PCB and the perspex)
Voltage/resistor meter, (always testing with hardware)
glue gun, (for attaching the servomotor on the hairpin and attaching the LDR, LED and wires)
soldering device, to mount the ATTINY on the PCB and solder the wires
programmer, (sorry, no other way to program the ATTINY45, this is not an ARDUINO)
(laptop with AVR Studio, AVR Studio is free!)
fine saw, for the PCB and the perspex
knife (for cutting the PCB, the wires)
tweezers(for positioning the ATTINY45 )
fine rasp (for the PCB and the perspex)
Voltage/resistor meter, (always testing with hardware)
glue gun, (for attaching the servomotor on the hairpin and attaching the LDR, LED and wires)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
