Print PDF
Favorite
Email
Step 5Note about drill presses
Speed and torque are changed by moving a belt.
Kepping everything in the middle is fine, but you will get better and faster cuts if you use the higher speed for small holes (belt is all the way up - big to little). Lower speed for the big holes (little to big pulley)
Kepping everything in the middle is fine, but you will get better and faster cuts if you use the higher speed for small holes (belt is all the way up - big to little). Lower speed for the big holes (little to big pulley)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
