Print PDF
Favorite
Email
Step 9Assemble arms
-Each arm is made of two parts - for this version you can just tape them
together. You could also put standoffs between the peices which would
leave a gap for motors and wires.
-Attach the servo armature to the robot arm. Using brad nails, attach the servo arms to the inside of the
robot arms. Line up the holes.
together. You could also put standoffs between the peices which would
leave a gap for motors and wires.
-Attach the servo armature to the robot arm. Using brad nails, attach the servo arms to the inside of the
robot arms. Line up the holes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
