Introduction: Whack a Button Multiplayer
This is an entry in the
Epilog Challenge 9
A game like a Whack-a-Mole.
Using LEDs and buttons.
There are 2 modes:
in single player mode, there are 3 levels:
LEVEL_1: 1 diode for 1 second
LEVEL_2: 2 diodes for 1 second
LEVEL_3: 2 diodes for 0.7 seconds
And for the multiplayer part it's very simple
1 player is giving targets and the other one is hitting them
Connect the Arduino, open the serial monitor, follow the steps and enjoy
Step 1: Step 1: Getting the Materials
For this project you will need:
1. Arduino Uno
4. Soldering PCB boards
Step 2: Making the Board for the First Player
Using the components, solder everything (or use a prototype board) like on the pictures.
Led1-> Arduino pin 13
Led2-> Arduino pin 12
Led3-> Arduino pin 11
Led4-> Arduino pin 10
Led5-> Arduino pin 9
Led6-> Arduino pin 8
Button1-> Arduino pin 7
Button1-> Arduino pin 6
Button1-> Arduino pin 5
Button1-> Arduino pin 4
Button1-> Arduino pin 3
Button1-> Arduino pin 2
Step 3: Making the 2nd Board
The connections for the 2nd board are:
Button1-> Arduino pin 14(A0)
Button1-> Arduino pin 15(A1)
Button1-> Arduino pin 16(A2)
Button1-> Arduino pin 17(A3)
Button1-> Arduino pin 18(A4)
Button1-> Arduino pin 19(A5)
Step 4: Step 4: Upload the Code, Set It and Play
Wait the countdown and whack-a-button!!!
Every round last for 45 seconds.
Correct button hit = +10 points
Wrong button hit = -5 points
Button miss = -1 point
Level 2, Level 3
1 correct button hit = +15 points
2 correct buttons hit = +30 points
Wrong button hit = -10 points
1 button miss = -1 point
We have a be nice policy.
Please be positive and constructive.