Introduction: What to Do With a 3d Printed Jack O' Lantern (updated)
This instructable describes what to do with a 3d-printed jack o' lantern. See my other instructables to learn how to model, render and animate a jack o' lantern..
Step 1:
1. 3d-print the stl-file of one of my modeled pumpkins..
Step 2:
1. Get yourself a LED based tealight, something like the one I modeled..
Step 3:
2. Glue woodsticks on the bottom, perpendicular, sticking out about 2 mm from the outside diameter.
Step 4:
Place the tealight in the pumpkin and turn the tealight around the vertical axis so It does not fall trough the bottom of the pumpkin.
Step 5:
The pumpkin stem is modeled in such a way that it can be used as a bracket!
Step 6:
3d print all my pumpkin models and hang them on a wire over the fireplace for example.
Participated in the
Jack o' Lantern Challenge