Introduction: Whip Cream Prank

Picture of Whip Cream Prank

I created this whip cream prank for april fools day. When fridge is open it pulls a string which makes whip spray onto floor.

Step 1: Supplies I Used

Picture of Supplies I Used
  • Whip Cream
  • String
  • Rubber band
  • 3D printed parts

Step 2: Tools I Used

  • 3D Printer
  • Fusion 360

Step 3: Design

Picture of Design

I started by making a cylinder. Then cut another cylinder through it. Added latches and rubber band grips. made the lever that pulls out and the one that goes down too turn on whip cream. Added notches to hold them. Then I added a rectangle to catch on the rim of the fridge's shelf to stop it from moving.

Step 4: Printing

Print all parts with 100% infill. Use supports for base.

Step 5: Setting Up

Picture of Setting Up

Attach rubber band using tabs, lever, and rectangle. Use picture as a guide. Attach string from whip cream to fridge. I recommend taping the whip cream to the fridge as well.


random_builder (author)2017-04-18

Ok prank, except it is a great way to waste whip cream!

Beardie_13 (author)2017-04-13

Great instructable! Your prank is awesome!

Jayden17 (author)Beardie_132017-04-14


About This Instructable




Bio: I am a novice cad designer and I own a modified cube 3, modified r1+, and a modified SD4. I design things in tinkercad and ... More »
More by Jayden17:Tinkercad Tips and TricksHow to Render Tinkercad DesignSnow Sculptures
Add instructable to: