With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
This is my first instructable and I hope you enjoy it. I will show you how I made a wide paracord bracelet with a side release buckle. This ...
First step is picking your colors. The optimal types are 2 colors that contrast. Also for your side release buckle I recommend a 1" size. This allows you ...
Take cord 4 and go under cord 5 and over the standing end of cord 6. Snug up the half knot.
You are then going to take cord 6 and go over 5 and then under the standing end of cord 4. Tighten the half knotup to the base ...
Now take cord 4 under 5 and over 6.
Now take cord 6 and go over 5 and under the standing end of 4. Tighten the entire knot up snug.
Now to start on the other side. Take cord 3 and go under 2 and over 1.
Take cord 1 and go over 2 and under the standing end of 3. Snug the knot up.
Now take cord 3 and go under 2 and over 1.
Take cord 1 and go over2 and under the standing end of 3. Tighten up the knot.
You are now going to cross cord 4 over the top of cord 3. This step connects the two seperate rows of square knots together. When you repeat ...
This is entirely up to you. There is no right or wrong way to do it, just make sure it is secure. What I normally do is use ...
When completed the bracelet should look like this.One tip: When you are nearing the end, have whoever you are making this bracelet for try it on. If it ...
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.