Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is my first instructable and I hope you enjoy it. I will show you how I made a wide paracord bracelet with a side release buckle. This is also a ...
First step is picking your colors. The optimal types are 2 colors that contrast. Also for your side release buckle I recommend a 1" size. This allo...
Take cord 4 and go under cord 5 and over the standing end of cord 6. Snug up the half knot.
You are then going to take cord 6 and go over 5 and then under the standing end of cord 4. Tighten the half knotup to the base of the previous knots....
Now take cord 4 under 5 and over 6.
Now take cord 6 and go over 5 and under the standing end of 4. Tighten the entire knot up snug.
Now to start on the other side. Take cord 3 and go under 2 and over 1.
Take cord 1 and go over 2 and under the standing end of 3. Snug the knot up.
Now take cord 3 and go under 2 and over 1.
Take cord 1 and go over2 and under the standing end of 3. Tighten up the knot.
You are now going to cross cord 4 over the top of cord 3. This step connects the two seperate rows of square knots together. When you repeat this cr...
This is entirely up to you. There is no right or wrong way to do it, just make sure it is secure. What I normally do is use a cow hitch with cords 2...
When completed the bracelet should look like this.One tip: When you are nearing the end, have whoever you are making this bracelet for try it on. If...
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »