Introduction: Wifi Cell Phone Charger

Picture of Wifi Cell Phone Charger

Step 1: Open Wifi Router

Picture of Open Wifi Router

Step 2: Remove Guts

Picture of Remove Guts

Step 3: Place Power

Picture of Place Power

Step 4: Secure Power

Picture of Secure Power

Step 5: Reassemble Wifi Router

Picture of Reassemble Wifi Router

Step 6: Done

Picture of Done

Comments

mmari2 (author)2014-02-23

why should i mess up a router to put a usb charger in it?

SeanS15 (author)mmari22015-05-17

Ive been looking for a way to add usb to my router to add an external hard drive this helps me complete my concept. If you can do it carefully nothing should get ruined.

shmadul (author)mmari22014-02-24

No it's a portable USB charger and I used the wifi router shell as a case

mmari2 (author)shmadul2014-02-25

Yes, but I can't understand why I should put a (tiny) USB charger that has its own case in a dead router (that's bigger)...

shmadul (author)mmari22014-02-25

It looks cool and it discusses it and you can trick your friend to think you are powering it in some weird way

shmadul (author)mmari22014-02-25

It looks cool and it discusses it and you can trick your friend to think you are powering it in some weird way

shmadul (author)mmari22014-02-23

The internet port had a short in it you could also use a old one like a g or one that got struck by lightning

shmadul (author)mmari22014-02-23

The internet port had a short in it you could also use a old one like a g or one that got struck by lightning

efahrenholz (author)2014-02-23

Biggest waste of time.

Budweiser143 (author)efahrenholz2015-01-04

I agree! Looks like something that was done just to say "hey, I made an instruactable" Kind of like this one here: How to fix a Loose door nob - goes through all this goofy stuff just to show how to tighten two screws!

shmadul (author)efahrenholz2014-02-24

How did it take you it should not have taken u long I did it for fun

tsekiguchi (author)2014-03-11

lol.

efahrenholz (author)2014-02-24

I didn't do the 'ible. I see no reason. You took a consumer ready usb battery charger and duck taped it to the inside of a router housing. It serves no purpose. It was fine out of the router housing.

shmadul (author)efahrenholz2014-02-24

It looks cool and it's my first one

shmadul (author)efahrenholz2014-02-24

It looks cool it's my first one

About This Instructable

3,445views

12favorites

License:

More by shmadul:Wifi Cell Phone Charger
Add instructable to: