Print PDF
Favorite
Email
Step 2Prep and Build the Signal Strainer!
Image 1:
-Using the snips and cup out a hole JUST big enough for the USB extension cord.
Image 2:
Squeeze the tip of the USB cord through hole.
Image 3:
-Adjust everything so the thumbdrive is at the FOCAL POINT of the parabola (I just eyeballed it).
-Fasten the USB cord in to place.
-Using the snips and cup out a hole JUST big enough for the USB extension cord.
Image 2:
Squeeze the tip of the USB cord through hole.
Image 3:
-Adjust everything so the thumbdrive is at the FOCAL POINT of the parabola (I just eyeballed it).
-Fasten the USB cord in to place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
![How To Get WIFI Signal From 1/4 Mile Away [or more] for less than $60](http://img.instructables.com/files/deriv/FMK/KV0M/GFA43M4S/FMKKV0MGFA43M4S.SQUARE.jpg)
