Wiimote B button rumble mod

Step 2 Putting the case back together and testing the light.

Once you have your LED in your B button and your wire soldered on the LED put your PCB back on the bottom part of your wiimote (make sure you have your wire out to the right for the vibrating feature) Then you'll see the wire for the rumble and a small + and - on top of the PCB (look to picture one) and solder the wire form the LED to the PCB(I would test this out before final solder)

pop some batteries into the wiimote and turn on your wii and scroll over some icons to test the rumble.

If everything is working right put your wiimote back together and go to step 3 to have a party!

Comments

[EagleGrip]

so do you solder the rumble motor and the LED to the same terminals?

[Wiimote Master]

Yes.

[craig3]

im guessing that the +is on the left and the - on the right?

[Wiimote Master]

Yes, just like the picture.

[nintendude49]

any idea what the voltage would be there?

[Wiimote Master]

3v or 1.5v