Introduction: Wind Generador

Picture of Wind Generador

  • NOW , WE GOING TO LEARNING HOE TO MAKE A WING GENERADOR , THAT'S SO VERY EASY AND VERY FUNNY !

Step 1: ETEP 1 : DRAWING

Picture of ETEP 1 : DRAWING

NOW YOU CAN DRAWING , THAT YOU IMAGINE , THATS HELPING TO HAVE MORE IDEAS

Step 2: STEP NUMER 2 : THE MATERIALS

Picture of STEP NUMER 2 : THE MATERIALS

NOW WE USE

  • A VASE
  • PAPERS
  • A SMALL MOTOR
  • TWO LEDS
  • WOOD
  • SILICON

Step 3: STEP 3 :

Picture of STEP 3 :

WITH THE MOTOR WE CAN , PASTE IN THE WOOD , AND IN THE VASE .

THE VASE IS A SIMPLY SUPPORT TO DONT FALL THE MOTOR WITH DE OTHER PIECES.

Step 4: STEP 4 : WORKING WITH YOUR MOTOR

Picture of STEP 4 : WORKING WITH YOUR MOTOR

NOW YOU CAN , TAKE YOU SMALL MOTOR AND TAKE TO WORKING

Step 5: STEP 5 : PASTE ALL

Picture of STEP 5 : PASTE ALL

NOW WE CAN PASTE THE MOTOR AND , YOU CAN WORKING WITH YOUR MOTOR AND YOUR LEDSS

Step 6: STEP 6 : FINALLY

Picture of STEP 6 : FINALLY

FINALLY WITH SOME AIR THAT YO CAN BLOW THE MOTOR , YOCAN SEE HOW DE LED TURN ON , AND HOW , BETWEEN MORE AIR MORE IS THE ENERGY IN THE LED :)

Comments

gmendez3 (author)2015-08-16

Hi Jhoss!

It's a very good start! Remember that our first step in the workshop was creating the plans for the Generator. Can you attach more pictures of the process and describe a little bit of what we did? If you need help, write it in spanish and I will translate it. Here are some of the photos of the project:

https://flic.kr/s/aHskhBNuqo

DIY Hacks and How Tos (author)2015-08-15

Interesting wind generator idea. If you have any more pictures, it would help to illustrate each step.

About This Instructable

324views

5favorites

License:

More by JHOSSELINE:Wind Generador
Add instructable to: