wineolanternee.jpg
Halloween + drinking = wine bottle jack-o-lanterns!

Turn regular cheap wine bottles into some funky Halloween decorations. Halloween decorations that you can drink! Even better.


This Instructable was brought to you by Krylon
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

wineolantern-15.jpg
What you need:
  • Cheap wine. Charles Shaw is always a winner here. $2 a bottle at Trader Joe's
  • Masking tape
  • Sharpie
  • X-acto knife
  • Spray paint. Definitely need orange, green is optional.
  • Bucket
The Goo Gone is for wine bottles that have particularly sticky labels that are hard to remove. Fortunately, the Charles Shaw labels are easy to remove and it wasn't needed here.
cjpetit says: Sep 2, 2012. 1:23 PM
It would also be cool if you put some Christmas lights inside!
SelkeyMoonbeam says: Jun 9, 2012. 7:04 PM
Ethanol actually works pretty well for removing wine labels too.
fungus amungus (author) in reply to SelkeyMoonbeamJun 10, 2012. 8:25 PM
True, but water comes out of my faucet :)
genterara says: Nov 1, 2011. 7:48 AM
Never Drink & Spray.
Christmas is coming, you can go on full Santa mode and paint candy cane bottles.
IMG_0240.JPG
fungus amungus (author) in reply to genteraraNov 1, 2011. 11:32 AM
Nice! I'm already planning a few Xmas versions. Just might have to use that candy cane one as well. :)
qbock says: Oct 30, 2011. 2:07 PM
The paint doesn't stick to the bottle do you have any sugestions
fungus amungus (author) in reply to qbockOct 31, 2011. 3:27 PM
Did you do a light coat? Make sure the glass is clean and do a very light coat of paint first. Be sure to wait for a while for it to dry and repeat the process. If you try to do it all at once it'll drip off.
genterara says: Oct 25, 2011. 9:38 PM
Thanks for the instructable. Since I was already drunk after two wine bottles, I decided to also follow the candy corn bottle instructable: http://swelldesigner.blogspot.com/2011/09/candy-corn-bottle-vases.html
IMG_0205.JPG
fungus amungus (author) in reply to genteraraOct 26, 2011. 3:55 PM
Ooh, nice pairing
tvengineer says: Oct 23, 2011. 8:48 PM
Thanks for this ibble... I really enjoyed making these :-)
DSCN6032.JPG
fungus amungus (author) in reply to tvengineerOct 26, 2011. 3:40 PM
Hey! Nice job!
Manny B says: Oct 21, 2011. 8:40 AM
Clever. When I first saw these, I figured you had started with CLEAR glass bottles and painted from the inside in reverse order (eye/mouth/nose 1st then, orange).
You still have a great recycling idea.
mrq2u says: Oct 13, 2011. 12:38 AM
Why not paint the bottle with the orange paint first then wrap bottle with painters tape and then cut out designs and paint designs?
fungus amungus (author) in reply to mrq2uOct 13, 2011. 9:49 PM
Then you're painting twice instead of once.
ModlrMike says: Oct 7, 2011. 3:25 PM
You could drop a glow stick into them and set them out for Halloween.
mbenner in reply to ModlrMikeOct 11, 2011. 8:45 AM
Great idea! I was racking my brain trying to figure out how to light it up. Thanks!
aholmes2 says: Oct 5, 2011. 5:10 PM
If you use white wine I wonder if it would look golden as if lit or of the orange behind would mess that up.... Hmmm. I may have to experiment.
DreamingSheep in reply to aholmes2Oct 9, 2011. 9:02 AM
Not quite sure, was just wondering a similar thing, but more about what it would look like empty. I'd be worried there there isn't enough light getting into the bottle with all the paint on it. Maybe with a thin enough layer, or if you only paint about two thirds of the bottle (leaving the back unpainted).

Love the idea of an LED too. Was thinking about a candle but there's always the risk of the glass breaking from the heat. Maybe a flickering/flashing LED stapped to some LR44 batteries so it can be dropped inside the bottle? You'd lose the Golden look you're after by emptying the bottle, but you could paint the 'face' or waterproof the LED circuit?
IamDeirdre in reply to DreamingSheepOct 10, 2011. 5:00 AM
In a pinch you could drop a glow stick in there! Very low tech. :-)
fungus amungus (author) in reply to aholmes2Oct 6, 2011. 1:02 PM
Good idea to try out. Can place the bottle on top of an LED candle.
El DJ says: Oct 9, 2011. 9:46 AM
This would be great for pumpkin mead :D
jaycodrew says: Oct 9, 2011. 8:54 AM
if you used a light colored bottle, or a clear glass bottle; you could fill it with water and green or yellow highlighter mix which glows under a black light. I would leave the bottoms unpainted and under light a couple with a black light for an eery glow coming from the mouth and eyes
lmnopeas says: Oct 7, 2011. 10:28 PM
These Rock!
notalis1970 says: Oct 6, 2011. 11:55 PM
I'm sooo doing this. I American but live in Italy and I'm the only one in town who decorates for Halloween, so what's better than a bunch of vino bottle jack-o-lanterns? LOL

My sister in Texas said she prints antique poison and medicine bottle lables and puts them on bottles at Halloween, too. Cute idea.
porcupinemamma says: Oct 6, 2011. 5:56 AM
Just thinking you could put pumpkin punch in it or toddy swamp juice (fruit punch with gummy worms perhaps?) :0) You made a fun project!
fungus amungus (author) in reply to porcupinemammaOct 6, 2011. 1:03 PM
Ooh, didn't even think of other drinks to put inside. Makes it more fun for the kids.
Dream Dragon says: Oct 5, 2011. 2:29 PM
Neat idea, I wonder what it would look like after you emptied it if you shone an led inside?
fungus amungus (author) in reply to Dream DragonOct 6, 2011. 1:01 PM
Could be good, but probably a better effect with a white wine bottle.
chabias says: Oct 6, 2011. 4:37 AM
Very cute idea!
sunshiine says: Oct 6, 2011. 3:12 AM
Love this entry! Thanks so much for sharing.
sunshiine
sandraellis says: Oct 5, 2011. 3:35 PM
This is actually pretty clever and will be a great conversation starter when you have guests over. Plus you dont have to clean up a sloppy mess!
somewhiteguy says: Oct 5, 2011. 1:50 PM
These look great and I'll definitely pass on to my wine-loving family that like to have Fall parties.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!