Introduction: Wine Bottle Lamp
Make a wine bottle lamp to celebrate New Year.
Step 1: Materials and Tools
Materials:
Wine bottle x 1
Small pepper bottle x 1
Christmas light set x 1
Extension wire x 2
PVC 3/4” elbow x 7
PVC 3/4” tee x 3
PVC 3/4” cross x 2
PVC 3/4” male adapter x 2
PVC 1” coupling x 1
PVC 1” cap x 1
PVC 2”x1” bushing x 1
PVC 3/4” pipe 2” long x 11
PVC 3/4” pipe 4” long x 2
PVC 3/4” pipe 6.5” long x 1
Gate valve 3/4” TP X 1
Tools:
Wire stripper / cutter
Saw
PVC cutter
Drill and bits
Measuring device
Screw driver
Electrical tape
Glue
Step 2: Working With PVC
Cut 2”x1” bushing in half, use the bottom.
At 1” to the end, drill through
holes on a 4” long 3/4” pipe and saw as picture shown, get the pipe one end can
be plug into wine bottle, and put it in 2”x1” bushing bottom.
Cut off 1” coupling 1/3. Drill holes
and cross cut as shown in pictures. Put it on small pepper bottle.
Drill a hole on a 3/4” elbow for extension
wires come out.
Step 3: Rewire Lights
Remove the ending socket of the Christmas light set and tape wires.
Cut off plug and put extension
wires.
Cut off several (5-6) lights form
the Christmas light set and put extension wires, these several lights will be
connect to the extension wires after assembling.
Step 4: Assemble and Glue
Put Christmas lights into wine bottle and the extension wires go through PVC.
Connect and tape those several
lights which cut off from light set, and put them into small pepper bottle.
Connect plug.
Assemble and glue all of the PVC together.
Now you can see beautiful lights
like wine flowing down through pipe.
Participated in the
Holiday Contest
Participated in the
Make It Glow Contest
Participated in the
Manly Crafts Contest
Participated in the
Workshop Contest