With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A hanging shelf made to look like the rib of an airplane wing.
I just used Paint and hand drew a wing rib. If you wanted to get real fancy you could use a CAD program or find a NACA airfoil you like and use it.
Print the airfoil out in banner-size, cut it out with an x-acto knife, and trace it onto your wood.
Use a jigsaw and cut it out. Then sand it up really well, cleaning up any jagged edges.
Drill the holes for the pegs, i marked the depth i wanted the holes with a sharpie on the bit and then drilled to that point.
Hang the shelf from the ceiling with some newspaper underneath and apply your stain. I only used one coat of stain, because I liked the color after th...
I attached two picture hanging brackets, used a level and hung up the shelf on my wall. I made it specifically to hold my four headsets. I hope everyo...
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Remove these ads by
Visit Our Store »
Go Pro Today »
... why doesn't he use the rack to hold his four hats?...