Print PDF
Favorite
Email
Step 5Get stabby
Fire up your soldering iron and open some windows because plastic fumes and lungs do not get on well together.
Poke 2 holes in the side walls of the keys, opposite each other. repeat with all the keys in bracelet. Make sure that you can get the cord though the holes and that you dont accidentally make them too big and take out the wall completely. when they are cooled you could trim off the excess plastic that splurges around the sides for neatness sake, or just leave it there as it has rounded edges and thus wont frey/cut/catch on the cord, extending the mileage.
Poke 2 holes in the side walls of the keys, opposite each other. repeat with all the keys in bracelet. Make sure that you can get the cord though the holes and that you dont accidentally make them too big and take out the wall completely. when they are cooled you could trim off the excess plastic that splurges around the sides for neatness sake, or just leave it there as it has rounded edges and thus wont frey/cut/catch on the cord, extending the mileage.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
4
Jul 26, 2009. 10:57 AMSalsa766
says:
what do you drill the holes with, a soldering iron? would a drill work?
Reply
7
Jul 27, 2009. 3:38 AMTangMu (author)
says:
indeed a drill would, i only had a soldering iron on my at the time
Reply
 |
Add Comment
|
