Step 1: Materials
You will need:
(2) wire hangars-without paint-
A pair of pliers
Step 2: Measure
Measure out (2) 8.5 in. Segments from your hangars. You will also need (4) 6.5 in. Segments.
Step 3: Assemble
Twist a loop on the top of each (2) 6.5 in. And (1) 8.5 in. Segment together. This will be one half of the stove. Do the same with the other three segments.
Step 4: Your Done!
Put the two pieces over top of each other and make an "X" with the bottoms in the ground. You put the fire under the "X" and put a pot or anything else on top. Enjoy.