With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
This tutorial teaches a few basic weaving techniques. These techniques are very important to know when you first start weaving with wire. Most weaving...
Materials: * 2 pieces 16g wire, at least 5” long * 2-3’ 26g wire Step 1 Wrap the 26g wire onto one of the 16g wires 4-5 times to secure the wire...
Step 2 Place the 2nd 16g wire next to the first. Bring the weaving wire underneath the 2nd wire. Then pull it up over the 2nd wire and back up underne...
Step 3 Bring the weaving wire up over the 1st wire again, then back under the 2nd wire. Notice you will be weaving in a “figure 8” pattern.
Step 4 Continue weaving as in the previous steps until you have about 1-2” of wire left. Note: in some tutorials, you will be told to leave more than ...
Step 5 Secure the end of the weaving wire by wrapping it around one of the 16g wires a few times. Cut the weaving wire close to the 16g wire and press...
Materials: * 3 pieces 16g wire, at least 5” long * 2-3’ 26g wire Step 1 Wrap the 26g wire onto one of the 16g wires 4-5 times to secure the wire...
Step 2 Place the 2nd 16g wire next to the 1st. Bring the weaving wire underneath the second wire.
Step 3 Pull the weaving wire up towards you.
Step 4 Place the 3rd wire next to the 2nd wire and push the weaving wire over the 3rd wire.
Step 5 Bring the weaving wire around the bottom of the 3rd wire and up between the 2nd and 3rd wires.
Step 6 Pull the weaving wire down between the 1st and 2nd wires, then underneath the 1st wire.
Step 7 Continue weaving in the same over/under pattern.
Step 8Continue weaving as in the previous steps until you have about 1-2” of wire left. Finish off as in Step 5 of Weave 1. Note: You can add as many ...
Step 2 Place the 2nd wire next to the first wire. Bring the weaving wire underneath the 2nd wire and wrap around it once.
Step 3 Pull the weaving wire down between the two wires, then underneath the 1st wire. Wrap around the 1st wire one time.
Step 4 Continue weaving as in the previous steps until you have about 1-2” of wire left.Finish off as in Step 5 of Weave 1. Note: Try wrapping the wea...
Weaving around a curve. This is a combination of weaves 1 and 3. This technique helps to eliminate the unsightly gaps that occur when weaving around ...
Step 2 On the outside of the curve, wrap the weaving wire around the 16g wire 1x.
Step 3 Bring the weaving wire back down between the two wires. Pull it up from underneath the wire on the inside of the curve. Pull it back between th...
Step 4 Continue steps 2 and 3 until you reach the end of the curve.
Step 5 Finish weaving the straight area as in the first weave. Finish off as in Step 5 of Weave 1. Note: If the curve is sharper than the one shown, o...
© Donna Spadafore, Gailavira JewelryYou may use this tutorial to make jewelry for sale. If you do so, please link back to Gailavira Jewelry ( http://w...
Tag files as:
Jewelry: Basic Weaving 3: Adding Beads to a Weaveby Gailavira
Jewelry: Basic Weaving 2: Adding a New Wireby Gailavira
Woven Freeform Swirly Ear Cuffby Gailavira
Carnival Pendant - Wire Jewelry Tutorialby Gailavira
Beaded Cross Pendantby Gailavira
Viking weave necklace and braceletby cbm104
Woven Uneven Heart Pendant Jewelry Making Tutorialby diylesson
Crossing the River - Copper and Magnesite Skull Ringby Gailavira
Woven yarn banglesby emilyvanleemput
Woven Ring Pendantby Mrballeng
Download our new apps for iOS and android!
©Copyright 2013 Autodesk Inc. All rights reserved.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.