Print PDF
Favorite
Email
Step 10Adding the Loop Wire
The second length of wire will be your loop wire wisted back on itself to create a loop that must be navigated along the path wire.
1. Strip about 1 inch of insulation from one end of the loop wire, and strip about 3 inches of insulation from the other end.
2. Secure the shorter stripped end to the game base with a machine screw, as shown in Figure.
3. Make a loop in the other end of the loop wire, encircling the path wire, as shown. (NOTE: Do not make the loop too small, or your game will be very difficult to win!)
1. Strip about 1 inch of insulation from one end of the loop wire, and strip about 3 inches of insulation from the other end.
2. Secure the shorter stripped end to the game base with a machine screw, as shown in Figure.
3. Make a loop in the other end of the loop wire, encircling the path wire, as shown. (NOTE: Do not make the loop too small, or your game will be very difficult to win!)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
