Print PDF
Favorite
Email
Step 5Making the Buzzer Sound
The buzzer can be made to work by connecting it directly to the battery pack. The buzzer has two short lengths of wire, called leads, for making electrical connections. The buzzer's red lead should be connected to the battery pack's red lead, and the buzzer's black lead should be connected to the battery pack's black lead, as shown in Figure.
1. Make sure the power switch on the battery pack is in the OFF position.
2. Insert the buzzer's red lead into the red wire side of the battery pack's wire harness.
3. Insert the buzzer's black lead into the black wire side of the battery pack's wire harness.
4. Move the switch on the battery pack to the ON position. The buzzer should make a sharp sound. If it does not, make sure that the buzzer leads are inserted far enough into the battery pack wire harness and check to make sure the red and black wires are not reversed.
1. Make sure the power switch on the battery pack is in the OFF position.
2. Insert the buzzer's red lead into the red wire side of the battery pack's wire harness.
3. Insert the buzzer's black lead into the black wire side of the battery pack's wire harness.
4. Move the switch on the battery pack to the ON position. The buzzer should make a sharp sound. If it does not, make sure that the buzzer leads are inserted far enough into the battery pack wire harness and check to make sure the red and black wires are not reversed.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
