Print PDF
Favorite
Email
Step 7Cutting Out the Base
As a base for your game, you need a rectangular piece of foam core measuring about 4 inches by 9 inches. In some cases, you may need to cut this base piece from a larger piece of stock.
1. Mark your measurements on the foam core.
2. Make your cuts with a sharpened utility knife, using the cutting mat to protect your work surface, as shown in Figure.
*note: It is best to use a metal straight edge
1. Mark your measurements on the foam core.
2. Make your cuts with a sharpened utility knife, using the cutting mat to protect your work surface, as shown in Figure.
*note: It is best to use a metal straight edge
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
