Print PDF
Favorite
Email
Step 5Insulate!
Now, you don't want to short out any of your Arduino + Xbee circuits.
Make sure the inside of your case is well insulated.
I just used some black card and cut it to the outline profile of the Altoids tin.
You will need three main insulating panels:
1. Bottom of tin
2. Underside of lid
3. Wrap around panel for Xbee module (see page about adding Xbee)
Make sure the inside of your case is well insulated.
I just used some black card and cut it to the outline profile of the Altoids tin.
You will need three main insulating panels:
1. Bottom of tin
2. Underside of lid
3. Wrap around panel for Xbee module (see page about adding Xbee)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
