Introduction: Wireless Radio Frequency Module Using PIC Microcontroller.

Picture of Wireless Radio Frequency Module Using PIC Microcontroller.

It's a Microcontroller Based DIY Electronics Project. Named Wireless RF Module Using PIC Microcontroller. The RF module is a small electronic circuit used to transmit, receive, or transceive radio waves on one of a number of carrier frequencies. RF modules are widely used in consumer applications such as garage door openers, wireless alarm systems, industrial remote controls, smart sensor applications, weather monitoring system, RFID, wireless mouse technology and wireless home automation systems. They are often used instead of infrared remote controls as they have the advantage of not requiring line-of-sight operation. For a Complete Stack that I've Created Related To This Project (Include Link To Project Report, Presentation, Images & All Other Important Stuff) Could Be Easily Accessed in this instructable.

              
Created By: Abhi Sharma

Step 1: Video-1 Brief Introduction & Configuration of Wireless RF Module.

Picture of Video-1 Brief Introduction & Configuration of Wireless RF Module.
In This Section I'll Embed Two Video Related To Wireless RF Module Project. It's a Complete But Brief Introduction To a Working Project. 

Step 2: Video-2 the Brief of Working in Wireless RF Module (Using PIC)

Picture of Video-2 the Brief of Working in Wireless RF Module (Using PIC)
This Video Explain The Working Of Program Written In The PIC MCU. Well, Not Explain But You Can Ask Me If Anything's Wrong You Found. Thanx Btw.

Step 3: Project Report - Wireless RF Module Using PIC Microcontroller.

Picture of Project Report - Wireless RF Module Using PIC Microcontroller.

"Here I'm Linking You To The Project report Of This Project. The Project report Includes Everything Related to It. Like Working, Ckt. Diagrams, Programming Code, Components List, Applications & Other Important Stuff."

Project Report:
-------------------------------
http://www.scribd.com/doc/98700331/Wireless-Radio-Frequency-Module-Using-PIC-Microcontroller
-------------------------------
Thanxx, Anyways. :)

Step 4: Project Presentation - Wireless RF Module Using PIC MCU (Slides).

Picture of Project Presentation - Wireless RF Module Using PIC MCU (Slides).

Here In This Step I'm gonna Add the Powerpoint presentation of my wireless project that I was supposed to convey at my seminar. Please Do get it either.

http://bit.ly/RHORS8
 
   OR


http://www.scribd.com/doc/105568779/Wireless-RF-Module-Using-PIC-MCU-Slides

Step 5: The Images Used in Project Report & Presentation.

Picture of The Images Used in Project Report & Presentation.

Please Follow The Following Link to Fetch the Pictures That Has been Used In Project Report & Presentation And Also Some Actual Project Pictures. It's a Link To Photobucket's Album. Thanx :
--------------------------------------------------------
http://photobucket.com/RFstuff2012
--------------------------------------------------------



Comments

gsandhu2 (author)2014-06-25

I’m working on a project which is about making a rescue
robot . I have struggling with it for 4 months and now all the mechanical works
had been done . but I’m facing difficulty in make the robot to work with rf
module can u plzz help me…

I want make transmitter and receiver that can control the
motion…I mean that receiver should have control 8 dc gear motor and each dc
motor should have a forward and backward botton to control the motion ……can u
kindly help me with this project ….if u can make the circuit board diagram for
the PCB ….or any other suggestion plz reply……mail me at “sunny1995gagan@gmail.com”

gsandhu2 (author)2014-06-25

I’m working on a project which is about making a rescue
robot . I have struggling with it for 4 months and now all the mechanical works
had been done . but I’m facing difficulty in make the robot to work with rf
module can u plzz help me…

I want make transmitter and receiver that can control the
motion…I mean that receiver should have control 8 dc gear motor and each dc
motor should have a forward and backward botton to control the motion ……can u
kindly help me with this project ….if u can make the circuit board diagram for
the PCB ….or any other suggestion plz reply……mail me at “sunny1995gagan@gmail.com”

About This Instructable

42,698views

56favorites

License:

Bio: I'm a Human. I have Two Eyes,Two Ears,One Nose,One Mouth & One Brain (That Sometimes Work And Sometimes Don't). I'm An Engineering Student With Electronics & Comm. As My Major. I Live Somewhere Near 'Taj Mahal' & I'm Some Of Among Those Guys, Who Love The Classical Combination Of Both Technology & Literature. And, I'm Still a Human ;-] More »
More by be-Abee:GSM Based Versatile Robotic Vehicle Using PIC MicrocontrollerTouch Sensors a.k.a Touch Hand Shake.Wireless Radio Frequency Module Using PIC Microcontroller.
Add instructable to: