Introduction: Wireless Relay - Simple & Cheap

Required Items:

  1. RF Relay
  2. Switch
  3. Terminal Strip
  4. Wire
  5. Solder (if switch isn't pre-wired)
  6. Connectors (only for input and output)

This is a very simple project I did to control an LED light strip.

The RF Relay is just a cheap garage door type device bought off eBay for a few dollars.

Attached is a wiring diagram as .PDF which should describe everything you need to make this yourself.

I put the unit inside a hobby box and attached a switch to act as a manual over ride.

Comments

About This Instructable

194views

6favorites

License:

More by DoubleKamehameha:Wireless Relay - Simple & Cheap
Add instructable to: