Instructables
Picture of Wireless USB Temperature & Humidity Datalogger
DSC06965.jpg
Parts
------------------------------------------------------------------------------------------------------------------------------------------------------------
U-EC6 USB Emulator Debugger source
RF-2410M source1 / source2
RF-2410U source1/ source2
SHT11 Digital Humidity & Temperature Sensor Source
Battery Holder source
Plastic Enclosure source

Source Code & Programming Utilities
 
Remove these adsRemove these ads by Signing Up

Step 1: Programming USB Dongle with Inhaos Programmer

Picture of Programming USB Dongle with Inhaos Programmer
Fisrt of all programming USB Dongle with Inhaos programming Module

Step 2: Programming RF-2410M Module

Picture of Programming RF-2410M Module
screen4.jpg
DSC06968.jpg
DSC06969.jpg
Programming RF-210M Module with SILABS Debugger

Step 3: Wiring

Picture of Wiring
DSC06972.jpg
DSC06976.jpg
Wiring all parts test & Mounting in case!

Step 4: WINXP & 7 Driver Setup

Picture of WINXP & 7 Driver Setup
WINXP & 7 Driver Setup

Step 5: Reader Software Install Gather Net Application

Picture of Reader Software Install Gather Net Application
screen2.jpg
screen.jpg
Step 1  Sensor Settings   
Step2   Program Settings Device UID 2a2b2c    RF Channel 110     Temperature & Humidity

Step 6: Connecting to reader module and test :-)

Picture of Connecting to reader module and test :-)
Connecting to reader module and test :-)
miguipda23 days ago

Hi,

I do not have enough electronic experience to be able to do that but let me tell you that could perhaps be cheaper to use those two grove systems to do the same thing :

1) the board (17 $) :

http://www.seeedstudio.com/depot/DevDuino-Sensor-Node-V2-ATmega-328-AAA-battery-holder-p-1850.html?cPath=19_22

2) the sensor (15 $) :

http://www.seeedstudio.com/depot/Grove-TemperatureHumidity-Sensor-Pro-p-838.html

or at 6$ :

http://www.seeedstudio.com/depot/Grove-TempHumi-Sensor-p-745.html

Perhaps could you then make a instructable instruction to know how to connect and use those two part of Wireless T°/H° sensor ?

Sincerely thanks and have a nice day,

Miguipda ;-)

P.S. : I though use this to be abl to know the garden moisture/T°/H° to activate the sprinkler in the garden during the night. Thanks for help ;-)

ayasashii1 year ago
The project is not clear and pictures are not enough.
Moreover, the source code & programming utilities cant be downloaded.
The link doesnt work for me, could you please send them to me,
this is my email: nihon.sahli@gmail.com
turbobug2 years ago
I looks as if i could use one or several of these for recording the temp and humidity in a beehive but I'm lost when it comes to these things. Is this something you bought put together and programed? How much did it cost?
signalelektronik (author)  turbobug2 years ago
You can make this module Approximately 80 USD
(Without U-EC6 USB Emulator Debugger ).

We are working for temperature and Humidity sensor Ethernet & WI-FI communication version. We want to sell online through on our website. I'll share with you all information in the near future.

Also we add some additional options our module overetemperature overmoisture SMS alert, EMAIL Alert etc...

Thanks in advance, for your kind reply.
signalelektronik (author) 2 years ago

Source Code & Programming Utilities Uploaded!
85rocco2 years ago
Very cool! Most of the people who will read this instructable are unfamiliar with the products you've used so I would really liked to have seen a much more detailed description of the parts as well as discussion of how and why they were used etc. The pictures and links just aren't enough.
signalelektronik (author)  85rocco2 years ago
Sorry about that. Because I forget share the source code & document!
Today I'll upload all of them.