Instructables

Wireless USB Temperature & Humidity Datalogger

Picture of Wireless USB Temperature & Humidity Datalogger
DSC06965.jpg
Parts
------------------------------------------------------------------------------------------------------------------------------------------------------------
U-EC6 USB Emulator Debugger source
RF-2410M source1 / source2
RF-2410U source1/ source2
SHT11 Digital Humidity & Temperature Sensor Source
Battery Holder source
Plastic Enclosure source

Source Code & Programming Utilities
 
Remove these adsRemove these ads by Signing Up

Step 1: Programming USB Dongle with Inhaos Programmer

Picture of Programming USB Dongle with Inhaos Programmer
Fisrt of all programming USB Dongle with Inhaos programming Module

Step 2: Programming RF-2410M Module

Picture of Programming RF-2410M Module
screen4.jpg
DSC06968.jpg
DSC06969.jpg
Programming RF-210M Module with SILABS Debugger

Step 3: Wiring

Picture of Wiring
DSC06972.jpg
DSC06976.jpg
Wiring all parts test & Mounting in case!

Step 4: WINXP & 7 Driver Setup

Picture of WINXP & 7 Driver Setup
WINXP & 7 Driver Setup

Step 5: Reader Software Install Gather Net Application

Picture of Reader Software Install Gather Net Application
screen2.jpg
screen.jpg
Step 1  Sensor Settings   
Step2   Program Settings Device UID 2a2b2c    RF Channel 110     Temperature & Humidity

Step 6: Connecting to reader module and test :-)

Picture of Connecting to reader module and test :-)
Connecting to reader module and test :-)