Step 4Final Placement
As you can see I caulked all around the board so hopefully the only cool air will be going into my computer. Be sure to move your hand slowly around the entire window and caulk any place you feel air coming through. Also remember that gap between the halfway open window that you have now, and be sure to stuff somethign in there, my final picture is the lovely, chic placement of some sweatpants in said gap.
This is my first instructable and could have been way better if I had taken more thought about it while doing the project but feel free to offer suggestions and improvements. I am thinking about possibly cutting another hole with some ducting going into the front air intake fan on the case as well as adding another fan to the other side of the wood barrier to really suck that air in.
I am running an AMD64 3200+ (non-OC) and right now my CPU temp is hovering around 29 C with an outdoor temp of 50F, I did this last year in a much worse but essentially the same setup and saw it drop as low as 15 degrees celsius (!) (of course I was freezing my ass off while using it because I didn't have the sweet duct!)
As a final motto: Be careful, have fun, and stuff your caulk in as many gaps as possible!
| « Previous Step | Download PDFView All Steps | Next Step » |
![]() |
Add Comment
|











































