Instructables

Step 3: Wood Carved Computer Case - Day 4

Day 4 :
So far today I have just sanded the front panel and applied a finish to it. I used acrylic paint and linseed oil to get an aged look. I then wiped off the excess oil and paint with a rag.

I thought the next step might be to look at the wiring as I haven't quite worked out how I am going to do it. I also need to reslove how I am going to create a button for the DVD burner to open. I have made a hole but haven't worked out the details. I also need to work out how to attach the drive door to the panel.
 
Remove these adsRemove these ads by Signing Up