Wood Lovers Faberge' Egg

Step 5 Filling the Pod Holes.

You can now fill the pod holes with a clear, colored resin. I used a hard wax filler that melts when heated. Epoxy can also be used but will take longer to cure. Make sure the holes are filled and no air bubbles surface and your foil is not pushed back too far into the hole. Use a piece of crumpled foil to hold the egg in place and allow your filler to set before turning. Otherwise your holes of gook will drip.

Allow the filler to set hard and sand with 100 grit sand paper to remove excess filler.