Print PDF
Favorite
Email
Step 3Cut out paper templates and glue to thin sheets of metal
You will now glue your templates onto thin sheets of metal, and then you tin snips to cut out the cross section.
You will need to file down the rough edges because the template needs to be dead on.
Typically you will want about 10 stations, or 10 cross sections from blade root to tip
You will need to file down the rough edges because the template needs to be dead on.
Typically you will want about 10 stations, or 10 cross sections from blade root to tip
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
