Print PDF
Favorite
Email
Step 4Making the wings and tail
For the wings and tail you need some small pieces of wood, triplex or MDF. Draw your wing and tail measurements on the wood and saw these off.
Get some masking tape and build your model without glue to see if it is what you had in mind. Make adjustments where needed.
Glue the pieces of wings and the tail together. DO NOT glue the wings or tail onto the body just yet!
Sand the wings and tail to prevent sharp edges and hide the seams where you glued them together.
Get some masking tape and build your model without glue to see if it is what you had in mind. Make adjustments where needed.
Glue the pieces of wings and the tail together. DO NOT glue the wings or tail onto the body just yet!
Sand the wings and tail to prevent sharp edges and hide the seams where you glued them together.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
