loading

Step 10: (Optional) Make a cute box!

Since this project was for a Secret Santa gift exchange, I made a cute galaxy themed box to package the rocket in. This step is entirely optional, but was really well received. I'd highly recommend it if you make this for a gift.

<p>Cool!</p>
<p>Very Cool, Thanks for sharing.</p>
<p>Nice build! According to my experience, you may get a clear aspect to the acrylic without using super glue, just by sanding to a higher grit.</p><p>I do this for acrylic pen blanks. I use micromesh sanding pads, going up to 12.000 (slightly wet the pads to avoid super fine dust).</p><p>I guarantee your acrylic window would look clear again with grits above 1.000 :)</p>
<p>As the recipient of the original, I can confirm that it's a pretty awesome gift! At some point I think I'll make a little light-up stand for it or something.</p>
<p>How about an LED that shines up through the bottom of the acrylic rod and illumiates the windows?</p>
The acrylic is inserted from the side so I'd need to drill up through the bottom in order to do that. Although I'm sure I could make it work I'd rather not modify the rocket itself.
<p>This turned out really well! It's adorable :)</p>
<p>I love lathe puns!</p>
Really nice! Voted
<p>Thank you so much!</p>
<p>That is wonderful, definitely going to have to try this project out. Thanks for sharing!</p>
<p>Thanks! It was a pretty quick project - like 2 days of work - especially if you do the fins more efficiently than I did, haha.</p>
<p>Absolutely beautiful!</p>

About This Instructable

11,099views

190favorites

License:

Bio: I'm an engineer, designer, and maker studying at the Georgia Institute of Technology.
More by vspencer:Wooden Rocket with a See-Through Window Paper Circuit Simon Says 
Add instructable to: