Introduction: Wooden Table and Plexiglas Design DIY Sunflower Oil

Wooden table for achieving the workshop with an old worktop recover. Both feet were made of plexiglass 15 mm thick laser cut and paste.

A plexiglass plate was added to fill the hole. The table is fixed to the wall with brackets.

To finish I wanted to make it simple and above all for € 0, there was the lapse sunflower oil dear me so I tested, the result is quite nice.

My other creation: http://mustermania.fr/

Comments

author
acheide (author)2016-04-23

Do you have instructions for your build?