Print PDF
Favorite
Email
Step 2Tools
You'll need:
Drill
Tin Snips
Irwin Unibit #1 Though one can use several bits to make successively larger holes, this tool will make you life easy and your holes better.
Safety Can Opener This is the kind that takes the top entire off the can, rather than cutting a hole in the top. One could use the other kind but this will leave a jagged hole and isn't recommended.
Also useful
Sharpie, Electrical Tape and Scissors for marking where the holes go. The ruler turned out useless, however a:
Fabric Tape Measure proved very useful indeed.
Drill
Tin Snips
Irwin Unibit #1 Though one can use several bits to make successively larger holes, this tool will make you life easy and your holes better.
Safety Can Opener This is the kind that takes the top entire off the can, rather than cutting a hole in the top. One could use the other kind but this will leave a jagged hole and isn't recommended.
Also useful
Sharpie, Electrical Tape and Scissors for marking where the holes go. The ruler turned out useless, however a:
Fabric Tape Measure proved very useful indeed.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jul 30, 2009. 9:44 AMp1pe
says:
Those tin snips suck because they're pruning sheers! :=O
Reply
 |
Add Comment
|
