Woodgas Can Stove

Step 6 Measure holes in outer wall

The outer can is about 13 1/4" in circumference. We measure 10 holes, an inch apart. leaving a gap between them. I centered this gap on the seam, because it looks nice, but this isn't necessary.

5/8" up from the rim turns out to be the sweet spot for the holes. An eighth inch either way won't kill ya.

Comments

[JeneretteP]

Don't you mean 13 and a quarter inch circumference? Diameter is across the widest point.

[atman]

Thanks! (This was in reference to step six, and was a brain fart; i got me basic geometry right in step 4. Corrected!)