Woodworking: Making wood projects without using nails, screws, or glue.

Picture of Woodworking: Making wood projects without using nails, screws, or glue.
Make knock-apart shelves, hinges, latches, books, chairs, cabinets, spice containers, doors, desks, and toolboxes using only wood to hold them together. Almost any wood project can be made without using any metal fasteners or glue. This instructable details the techniques and tools I have successfully used over the years to do this.

So, rather than just showing a single project, I will demonstrate a system of fairly simple woodworking joints that you can use to create your own wood projects. Best of all, all the projects featured here can be entirely made with hand tools (although power tools will make it go faster and easier).

Woodworking without metal or glue is of course nothing new. Colonial Americans, Japanese woodworkers and even the ancient Egyptians and Chinese developed all kinds of ways to fasten wood together using only the wood itself. Sometimes, we can discover our future in the past.

Advantages to all-wood woodworking

1-Using these age old techniques, you can save on the cost of fasteners and expensive power tools.

2-Most projects can be easily taken apart for shipping or transport.

3-All-wood joints and fasteners allow for the wood to move with seasonal shrinkage and expansion. Nails and screws hold the wood fast, allowing little movement which eventually cracks the wood around the metal fastener. The movement of the wood, moisture, and the deterioration of glue will eventually
loosen any glued wood joint.

4-When done properly, projects made entirely of wood, can last as long as the wood, which can be more than a thousand years. If you want to build quickly for yourself, use nails, screws, and glue. If you want to build for your children and grandchildren and beyond--you might try using wood-only joinery.

Below are a few example of things I have made without glue or metal. Read the next few steps to see more project examples and details on how they can be made.

pic 1 shows a cantilevered chair made out of Phillipine mahogany.

Pic 2 is a cabinet of pine and cedar.

Pic 3 is a wood book made of cedar with a walnut hinge.

Pic 4 is a spice rack of cedar and aspen.

Pic 5 is a stool made of walnut and alder.

1-40 of 50Next »
Goesto115 years ago
I found this instructable really inspiring! Thanks! I made this bookshelf using only your instructions, a couple of chisels, a mallet, a handsaw and a lot of sandpaper. No power tools!
book shelf detail.JPGbook shelf.JPG
frenzy Goesto115 years ago
This posting has won today's "I Made It" Challenge. For winning you will receive a 3 month pro membership!

Thanks for using instructables!


This kind of woodworking is really the only woodworking. Soon there will be no glue, or nails or screws. Then real woodworkers will shine because they'll be the only ones building furniture. So it seems to make sense to start building furniture and other things without glue or fasteners now so the right thinking and habits will be in practice already when the time comes...

dmoonen6 months ago

can you make a big table using this systems?

mikey77 (author)  dmoonen6 months ago


Trestle tables were made in the Colonial days and later, using wood wedges to hold the structure together.

You could do it too.

dmoonen mikey776 months ago

but how would one attach the table top?

mikey77 (author)  dmoonen6 months ago

You could scale up the cabinet door in pic2 above and make the table top like that. Then, you just extend the dowels long enough to go through a horizontal piece that is attached to the legs.

Wedges then hold the dowels in place to attach the top.

I(ll but this instructable in my "best" list !!!…

thank yo again.

One question though, any particular instruction for making the seasoning vials / pots ?
mikey77 (author)  vincent75201 year ago
I made the spice vials out of dead standing aspen that still had bark on it that was pealing off. This age of dead tree gives it a varied patina that looks like glazed ceramic.

The vials were cut to length and then hand drilled with a brace and bit. Melted beeswax was then poured into the cavity and then poured right out. This left a thin waterproof coating on the inside of the container.

I used corks or stoppers made of juniper branches that were beveled to fit with a chisel. Two coats of tung oil finished the container.
Thank you so much for answering !
Super cool work, I hope one day be able to build something using the only wood technique. A couple of weeks ago, a neighbor gave me some antique wooden textile tools and to my surprise, they were assembled by wooden nails and screws...
pcgate1 year ago
Wow. Seriously just wow. So impressed and inspired by this.
McQAC3 years ago
Great instructable. I smiled the entire way through it at the simplicity of the art joinery used.
sallyab3 years ago
Love it. Really inspiring in every way and excellent information too. I have been sitting staring at the back of an Anatolian cupboard, which must become a second front (the real front is beautifully (and primitively) carved and finally see how I can add doors without being invasive.

Someone has told me to use rice oil to treat it. I haven't t researched exactly what it is yet. I wonder if you've heard of it? (this is a different world. so probably not...)

Thank you very, very much for this Instructable...!
BillyManily3 years ago
Wow, that is very interesting, it opens a whole new world of posibilityes, i want to learn not to need electricity to make things and this is one of the important subjects to learn, Does anyone know of ''the book to have'' on this subject?? that would be amazing!! Thancks, regards
i know the post is a little old, but there's a book my dad used to have called "Back to Basics". it had a good amount of information on primitive woodworking, construction techniques, and lots of information on living off grid.
Hey, great book, thancks for the info, let me know if you discver any more, regards
zyon5 years ago
Very nice work and ideas.
Do you have detailed pics/diagrams on the construction of the German style clamp? What kind of mechanism stops the movable jaw from sliding back when the lever is applied?
mikey77 (author)  zyon5 years ago
The mortise in the movable jaw contacts the bar in two places and the leverage locks it in place.

Sorry, I am too busy working on new projects to have time to photograph and explain in detail all of them.
AnCod mikey773 years ago
I know it's been awhile since you put this up, but great info. I just wanted to second what zyon asked about the German style clamp. I've looked all over the place for specific designs for the one you have but haven't found anything. Would be great if you could put something up on it. Thanks!
nice projects youve done there although i counted 4 screws 0n pics 29 an 30 lol some good ideas for me to try out cheers
Very Very nice! was looking for a little joinery info and got a lot quickly and clearly!
Awesome. Thanks for sharing. One thing that I was wondering about: you mentioned the orbital power sander for finishing work. I was under the impression that the orbital sander was better for more of the earlier prep, as it is more important to sand with the grain of the wood as the project progresses...?
mikey77 (author)  quoththealan6 years ago
If you are using a belt sander or hand sanding it is generally better to sand with the grain. A random orbital sander ( Like the Makita sander in the picture) sands in all directions but for a very short stroke. At the same time it spins like a rotating disk sander. So part of the time it sands against the grain and the rest of the time it sands with the grain. You can achieve a very fine finish (good enough for everyone but the ultra purists) using this as the last sander. If I have to take off a lot of wood to flatten or flush up joints I first use a belt sander with 80 grit going more or less with the grain. Then I sand with a random orbital sander at 150 grit followed by 220 grit and this gives a beautiful finish after three coats of tung oil. That said, the ultimate smoothness on wood is usually achieved using a finely tuned hand plane with a very sharp blade or a hand scraper or a power thickness planer with a new blade. These tools slice through the wood leaving the smoothest possible surface.
craftykarla5 years ago
Hey mikey77: Love the concept of wood only projects! Do you know of any good books (with pictures/drawings) about woodworking without glue, nails, and hardware? Thanks. craftykarla
Spice rack5 years ago
Nice spice rack. very authentic and classic, great for Huts, Wood Cabins, and outland houses. Nice post
Esque5 years ago
Absolutely brilliant 'ibble!! Incredibly usefull and very well written, 10 out of 10 from me. Thank you very much.
Dr.Hax5 years ago
You, sir, kick arse.  Thank you very much for this instructable.  Quite an impressive array of techniques.
laxap5 years ago
Joinery w/o metal pieces nor glue is the holy grail of woodworkers...

The technique shown in picture 44 (step 11) is totally new to me. Great!

Fred826645 years ago
This is cool looks like some one is taking notes from the Yankee Wood Shop show on PBS !  and for the record yes I do like the show.  
liam015 years ago
Thank you for writing this instructable, it has inspired my next college project. Cant wait to try some of these out!
Jayefuu5 years ago
Wow. 5*. Was nice to see some examples of how the joints are used rather than just showing how to do them. Thanks!
skorange5 years ago
Incredibly informative and inspiring.  Thank you
 this is very informative and helpful
greatly apreciated
opanocat55 years ago
 Or if you want to be scientific the title of this instructable should be "Joinery Basics"
I really like the Devil's Wedge.
turtleshane5 years ago
isnt this chair designed originally by Nakashima?
andres76 years ago
very good Instructable, very informative, two thumbs up
Renno6 years ago
"We must overcome the wisdom to achieve simplicity" You succeeded!! good job
1-40 of 50Next »