Print PDF
Favorite
Email
Step 9Extra Credit
I needed a place to hang tools, so I built a shelf & peg board area. I really want, and will at some point, build a similar contraption using rare earth magnets & steel sheet metal, but for the weekend, this is what I got.
Build a simple frame and screw down the peg board. Then take some 2x4's and your excess piece of plywood and make a shelf. Screw it to the top of your peg board frame and then screw the whole contraption to the top of your table.
Voila. You're done.
Have a(nother) beer.
Congratulations.
Build a simple frame and screw down the peg board. Then take some 2x4's and your excess piece of plywood and make a shelf. Screw it to the top of your peg board frame and then screw the whole contraption to the top of your table.
Voila. You're done.
Have a(nother) beer.
Congratulations.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Apr 5, 2010. 11:21 AMMig Welder
says:
pretty cool. thanks for making the 'ible :D
Reply
 |
Add Comment
|
